|
Because no two modelers will build the same model
exactly the same, this structure competition allows each modeler to use
the same identical structure and add his own personal touch. There are
no restrictions to the style, type, condition or materials used to build
the model. It can be built to the scale and prototype that you model so
it can be used in your layout after the competition.
THE RULES
1. The structure can be built in any scale and must
be built to the basic dimensions shown in the plan.
2. The base that the structure is sited on is to be
a maximum size of 40 scale feet by 20 scale feet. For
example, in 1/4”to the foot scale, the base would
be a maximum of 254 mm by 127
mm, while in Ho scale the base would be a maximum of 140 mm by 70 mm.
The height of the base is not restricted.
3. The structure can have doors, windows, etc.
where you choose to place them. You can also add verandas,
chimneys, lean to’s which are attached to the structure, fences, a full
interior and any other item that would be attached to that type of
building. Also figures, animals , vehicles, trees etc can be included.
4. If a board walk or veranda is added to the
front, it has a maximum width of 6 scale feet.
|
|
|
My model was built in 1/4" to the
foot scale, and was located on a fairly steep slope to take advantage of the
rules not stating what type of foundation the structure was to sit on. This gave
the structure a lot of character and added detail could be included, such as the
open side doors with a employee lifting supplies up to the building. The model
also features a hand lettered sign on the false front, rusted metal side and
rear walls, and a horse water trough out front. Below are photographs of the
structure.
The model was fortunate to be voted first
place in this interesting section of the competition.
Below are the four sides of the structure. |
